The survey is aimed at evaluating the geological parameters and establishing the surface and downward trends of a suspected quarry rock material, through resistivity variation characteristics, prior to the location of a rock quarry as well as estimating the overburden thickness. Geological study revealed that the dolerite has density of 1,200kgm3. A total of six (6) vertical electrical soundings (VES) and four (4) horizontal resistivity profiling (HRP) were carried out using Abem Terrameter SAS 1000 with Schlumberger array of electrode spacing of 200m and Wenner electrode array configuration were carried out with 10m respectively, field data were processed using different forward and inverse modeling computer Res2Div software. The VES results revealed that dolerite occurred at VES 5, VES 8 and VES 9 positions with thickness ranging from 12meters to 25meters but dolerite did not appear at; VES 2, VES 3 and VES 7. The results of the horizontal resistivity profiling HRP line trending north-east and south-west reveals that the intrusive rock occurs in boulders form scatter beneath the overburden in a very limited quantity while north-east direction indicates abortive. Results of the analysis show that the overburden thickness is not uniformly distributed, it decreases toward the natural hills (places of appreciable elevation and decreases as one approaches the low land areas (valley). The estimated volume of dolerite is 34, 92000.00 million tons.