Volume 30, Issue 3, May 2017, Pages 326–329
V. KRISHNA1, D. MARK KINGSTON AGASSY2, M. LOKESHWARAN3, D. BHARATHI4, and N. BAGYALAKSHMI5
1 Student, Department of EIE Adhiyamaan College of Engineering, Hosur, India
2 Student, Department of EIE Adhiyamaan College of Engineering, Hosur, India
3 Student, Department of EIE Adhiyamaan College of Engineering, Hosur, India
4 Student, Department of EIE Adhiyamaan College of Engineering, Hosur, India
5 Faculty, Department of EIE, Adhiyamaan College of Engineering, Hosur, India
Original language: English
Copyright © 2017 ISSR Journals. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
The present project is about the design and implementation of dip coating conveyor automation system for brake shoes based on Programmable Logic Controller (PLC) technology. The PLC correlates the operation parameters control required by the user and monitors the system during normal operations and under dipping condition. Tests of dip coating system is driven by three phase AC induction motor driver using Variable Frequency Drive (VFD) controller. PLC provides higher accuracy in regulation as compared to human works, PLC is proved as a versatile and wide effective tool in industrial control of electric drives. Here it is correlating hardware and software together to control parameters of DIP coating system.
Author Keywords: Dip Coating Conveyor, Programmable Logic controller (PLC), DOL, Variable frequency drive (VFD).
V. KRISHNA1, D. MARK KINGSTON AGASSY2, M. LOKESHWARAN3, D. BHARATHI4, and N. BAGYALAKSHMI5
1 Student, Department of EIE Adhiyamaan College of Engineering, Hosur, India
2 Student, Department of EIE Adhiyamaan College of Engineering, Hosur, India
3 Student, Department of EIE Adhiyamaan College of Engineering, Hosur, India
4 Student, Department of EIE Adhiyamaan College of Engineering, Hosur, India
5 Faculty, Department of EIE, Adhiyamaan College of Engineering, Hosur, India
Original language: English
Copyright © 2017 ISSR Journals. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Abstract
The present project is about the design and implementation of dip coating conveyor automation system for brake shoes based on Programmable Logic Controller (PLC) technology. The PLC correlates the operation parameters control required by the user and monitors the system during normal operations and under dipping condition. Tests of dip coating system is driven by three phase AC induction motor driver using Variable Frequency Drive (VFD) controller. PLC provides higher accuracy in regulation as compared to human works, PLC is proved as a versatile and wide effective tool in industrial control of electric drives. Here it is correlating hardware and software together to control parameters of DIP coating system.
Author Keywords: Dip Coating Conveyor, Programmable Logic controller (PLC), DOL, Variable frequency drive (VFD).
How to Cite this Article
V. KRISHNA, D. MARK KINGSTON AGASSY, M. LOKESHWARAN, D. BHARATHI, and N. BAGYALAKSHMI, “DIP COATING CONVEYOR AUTOMATION SYSTEM FOR BRAKE SHOES using Programmable Logic Control (PLC),” International Journal of Innovation and Scientific Research, vol. 30, no. 3, pp. 326–329, May 2017.
